GN91 Glue Nitrile Examination Gloves

WE DO WHOLESALE AT DISCOUNTED RATES
CONTACT US ON 02755675 FOR WHOLESALE PRICING.
GN91 Glue Nitrile Examination gloves-1 zoom

Hover

GN91 Glue Nitrile Examination gloves-2 zoom

Hover

GN91 Glue Nitrile Examination gloves-1
GN91 Glue Nitrile Examination gloves-2
Full Screen

GN91 Glue Nitrile Examination Gloves

24.46

Box of 200 GN91 Glue Nitrile Examination Gloves

Passes EN ISO 374-5:2016 for protection against viruses.

Clear

Description

Box of 200 GN91 Glue Nitrile Examination Gloves

EN16523-1
Result
EN374-4:2013 Degradation*
K-40% Sodium Hydroxide
6
-45.4%
EN ISO 374-1:2016 Permeation levels are based on breakthrough times as follows:
Performance Level
1
2
3
4
5
6
Minimum breakthrough times (mins)
10
30
60
120
240
480

*EN 374-4:2013 Degradation levels indicate the change in puncture resistance of the gloves are exposure to the challenge chemical (negative results indicate increased resistance).

EN ISO 374-5:2016 – Protection against bacteria and fungi – Pass, Protection against viruses – Pass.

Compliant with the Medical Devices Directive 93/42/EEC and European standard EN455:Medical Gloves for Single Use parts 1,2,3 and 4.

This information does not reflect the actual duration of protection in the workplace and the differentiation between mixtures and pure chemicals. The penetration resistance has been tested under Laboratory conditions and relates only to the tested specimen. The chemical resistance has been assessed under laboratory conditions from samples taken from the palm only and relates only to the chemical tested. It can be different if the chemical is used in a mixture. It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may differ from the type test depending on temperature, abrasion and degradation. When used, protective gloves may provide less resistance to the dangerous chemical due to changes in physical properties. Movements, snagging, rubbing, degradation caused by the chemical contact etc. may reduce the actual use time significantly. For corrosive chemicals, degradation can be the most important factor to consider in selection of chemical resistant gloves. Fit for special purpose: Gloves are designed to be tight fitting and therefore they may not meet the requirements of EN420 for sizing. Inspect gloves for defects or imperfections before use. Contains accelerators which may cause allergic reactions. You are advised to retain this packaging for reference. These products are classed as Personal Protective Equipment (PPE) by the European PPE Regulation (EU) 2016/425 and have been shown to comply with this Regulation through the Harmonised European Standards(s) EN 420:2003+A1:2009 and EN ISO 374-1:2016 and EN IS 374-5:2016. EU Type Examination and Module C2 carried out by SATRA Technology Europe Ltd, Bracetown Business Park,Clonee, Dublin, D15YN2P, Ireland (Notified Boy No. 2777)

Additional information

Weight 0.8 kg
Dimensions 24 × 13 × 8 cm
Size

XL

You may also like…

Leave a Reply

Your email address will not be published. Required fields are marked *

78 + = 87

LinkedIn
LinkedIn
Share